Gas Courses:

Prices shown are for initial courses and do not include training or certification fees. 

We also offer package prices- please contact us for more information.

Please note: If you have no existing Gas Qualifications an IGQ/MLP must be taken prior to acceptance on to any ACS course.

CCN1 Core Domestic Gas Safety

 Assessment for candidates seeking to renew or obtain the Domestic Core Natural Gas Safety qualification, CCN1. Candidates must have achieved completion of a full Managed Learning Programme before attendance.

CCLP1 (B) Core LPG safety for boats, yachts and other vessels

Please note: we cannot offer CCLP B for initial candidates (new entrants to the gas industry). 

CCLP1 (EP) Core LPG safety for external pipework

All aspects relating to core domestic LPG gas safety. The initial knowledge area for this course is related to permanent dwellings (house, flats etc), but additional areas such as leisure accommodation vehicles (caravans), residential park homes and boats can also be undertaken.

VESLP1 Gas storage vessels and controls (Single LPG supply)

This is assessment only and covers the installation and commissioning of LPG gas storage vessels and controls (Single LPG Supply) with up to 32mm Pipework.

VESLP2 Gas storage vessels and controls (Multiple LPG supply)

This is an assessment only which covers the installation and commissioning of LPG gas storage vessels and controls (Single LPG Supply) with up to 63mm Pipework.

HTRLP2 Closed flue gas fires

This Gas Safety Assessment is designed to test the gas safety competence of an operative in the work of installation, exchange, disconnection, servicing, repair, breakdown and commission of closed flued liquefied petroleum gas fires by practical, knowledge and understanding assessment.

HTRLP3 Caravan space heaters

This Gas Safety Assessment is designed to test the gas safety competence of an operative in the work of installation, exchange, disconnection, servicing, repair, breakdown and commissioning of liquefied petroleum gas caravan space heaters by practical, knowledge and understanding assessment.

REFLP2 Caravan / boat gas refrigerators

This Gas Safety Assessment is designed to test the gas safety competence of an operative in the work of installation, exchange, disconnection, servicing, repair, breakdown and commissioning of liquefied petroleum gas space refrigerators in motorised and touring caravans and/or boats by practical and knowledge & understanding assessment.

WATLP2 Caravan gas water heaters

This Gas Safety Assessment is designed to test the gas safety competence of an operative in the work of installation, exchange, disconnection, servicing, repair, breakdown and commission of liquefied petroleum gas water heating appliances in motorised and touring caravans by practical and knowledge & understanding assessment.

CESP1 Core emergency service provider

This Gas Safety Assessment is designed to test the gas safety competence of an operative in core domestic and commercial emergency service gas work by practical and knowledge & understanding assessment:

CoDNESP1 core changeover (CCN1 - CESP1)

This Changeover Assessment is designed to assess the gas safety competence of an operative holding Core Domestic ACS certificate CCN1 who intends to carry out work for an emergency service provider, dealing with gas emergencies downstream of the emergency/meter control by practical and knowledge and understanding assessment.

LEILP1 Single Bottle Supply Leisure Equipment

Please contact us for more information on this course.

CMA1 Core Meter Installers

Please contact us regarding this course.

CMET1 low pressure diaphragm and RPD meters

This Gas Safety Assessment is designed to test the gas safety competence of an operative in the work of installation and exchanging commercial low pressure diaphragm and rotary displacement meters by practical and knowledge & understanding assessment.

MET3 (LS) New fix primary domestic gas meters (Limited scope operatives)

Please contact us regarding this course.

MET4 Diaphragm type gas meters

This Gas Safety Assessment is designed to test the gas safety competence of an operative in the work of installation, exchange, removal and commissioning of diaphragm type gas meters by practical and knowledge and understanding assessment.

REGT1 Domestic medium pressure meter regulators and controls

 

CMDDA1 Carbon Monoxide Testing

Training and assessment to assess competence of gas engineers to carry out CO/CO2 and combustion performance testing using electronic portable gas analysers on domestic gas appliances, following indications of fumes, smells, spillage or leakage of combustion products, CO detector activation etc. The range of the assessment covers the use of the analysers to determine ambient levels of CO and presence of CO2 in dwellings, CO and CO2 in combustion products from flueless appliances (Type A), open flued appliances (Type B), and room sealed appliances (Type C).

CABLP1 Mobile Cabinet Heaters

Install, Service, Commission, Repair of  Radiant, Flame Effect and Catalytic Mobile Heaters

REGT2

Please contact us for information on this course.

CKR1 Domestic Gas Cooking Appliances

This Gas Safety Assessment is designed to test the gas safety competence of an operative in the work of installation, exchange, disconnection, servicing, repair, breakdown and commissioning of domestic cooking appliances by practical and knowledge & understanding assessment.

HTR1 Domestic open, balanced and fan assisted flued gas fires and wall heaters

This Gas Safety Assessment is designed to test the gas safety competence of an operative in the work of installation, exchange, disconnection, servicing, repair, breakdown and commissioning of domestic open, balanced and fan assisted flued gas fires and wall heaters by practical and knowledge & understanding assessment.

LAU1 Domestic Gas Laundry Appliances

This Gas Safety Assessment is designed to test the gas safety competence of an operative in the work of installation, exchange, disconnection, servicing, repair, breakdown and commissioning of domestic gas laundry appliances by practical and knowledge & understanding assessment.

CENWAT, Central heating / hot water boilers & circulators, combination boilers, storage water heaters and instantaneous water heaters.

This course replaces CEN1 and WAT1.

DAH1 Domestic gas fired ducted air heaters not exceeding 70kw input

This Gas Safety Assessment is designed to test the gas safety competence of an operative in the work of installation, exchange, disconnection, servicing, repair, breakdown and commissioning of domestic gas fired ducted-air heaters not exceeding 70kW input by practical and knowledge and understanding assessment.

LEI1 Domestic gas fired leisure and miscellaneous equipment / appliances

This Gas Safety Assessment is designed to test the gas safety competence of an operative in the work of installation, exchange, disconnection, servicing, repair, breakdown and commissioning of  the following appliances:

MET1 Domestic Gas Meters

This Gas Safety Assessment is designed to test the gas safety competence of an operative in the work of installation, exchange, disconnection, servicing, repair, breakdown and commissioning of domestic gas meters by practical and knowledge and understanding assessment.

CKHB1 Domestic gas range cookers & range cooker / boiler appliances

This Gas Safety Assessment is designed to test the gas safety competence of an operative in the work of installation, exchange, disconnection, servicing, repair, breakdown and commissioning of  range cooker, hot water boiler with forced draught burner by practical and knowledge and understanding assessment.

HWB1 Gas fired hot water boiler appliances with atmospheric burners (15 - 140kw)

This Gas Safety Assessment is designed to test the gas safety competence of an operative in the work of installation, exchange, disconnection, servicing, repair, breakdown and commissioning of swimming pool boilers by practical and knowledge & understanding assessment.

DFDA1 Appl. fitted or to be fitted with forced draught burners up to 70kw in domestic dwellings

This Gas Safety Assessment is designed to test the gas safety competence of an operative in the work of installation, exchange, disconnection, servicing, repair, breakdown and commissioning of a forced draught gas burner used to replace a oil fired pressure jet by practical and knowledge and understanding assessment.

CoLPNG1 Core changeover (CCLP1 to CCN1)

An assessment of the individual’s competence in gas safety related areas, specifically installation, exchange, disconnection, service, repair and commission of domestic natural gas appliances and equipment.

CoCDN1 Core Changeover (COCN1 to CCN1)

A course and following assessment to enable those who currently perform commercial natural gas work, to expand their range of work into the domestic field. Having obtained this qualification, you will then be able to apply for the domestic appliance assessments that relate to your work, to enable you to work unsupervised in domestic property.

CCLNG1 Core Commercial Laundry Gas Safety

This Gas Safety Assessment is designed to test the gas safety competence of an operative in core commercial laundry gas work by practical and knowledge and understanding assessment (includes CLE1). Candidates must have achieved completion of a full Managed Learning Programme before attendance.

CLE1 Commercial Laundry Appliances

Laundry Equipment installation, commissioning, servicing & fault finding on Commercial Laundry Equipment.

COCN1 / CODNCO1

This assessment or a changeover assessment must be completed by the operative prior to taking any other commercial assessment.

CCCN1 Core commercial catering gas safety

This Gas Safety Assessment is designed to test the gas safety competence of an operative in core commercial catering gas work by practical and knowledge and understanding assessment. Candidates must have achieved completion of a full Managed Learning Programme before attendance.

CONGLP1

This is the assessment for converting natural gas qualifications to LPG and is a pre-requisite assessment for all other LPG appliance assessments, without holding an existing LPG core qualification.

CONGLP1(PD) core changeover (NG to LPG) for permanent dwellings

This Gas Safety Assessment is designed to test the gas safety competence of an operative intending to extend the work range from natural gas to liquefied petroleum gas in both domestic and commercial permanent dwellings by practical and knowledge and understanding assessment.

CONGLP1 (RPH) core changeover (NG to LPG) for residential park homes

This Core Gas Safety Assessment covers the competencies required to cover Liquid Petroleum Gas in Residential Park Homes.

CONGLP1 (LAV) core changeover (NG to LPG) for leisure accommodation vehicles

This Core Gas Safety Assessment covers the competencies required to cover Liquid Petroleum Gas in Leisure Accommodation Vehicles.

CONGLP1(B) core changeover (NG to LPG) for boats, yachts and other vessels

This Core Gas Safety Assessment covers the competencies required to cover Liquid Petroleum Gas in Boats, Yachts and other Vessels.

CONGLP1 (CMC) core changeover (NG to LPG) for mobile catering

This is the assessment for converting natural gas qualifications to LPG and is a pre-requisite assessment for all other LPG appliance assessments, without holding an existing LPG core qualification.

ICPN1 (LS) 1st fix commercial pipework (Limited scope operative)

This Gas Safety Assessment is designed to test the gas safety competence of an operative in first fixing of commercial installation pipework BUT WILL NOT BE CONNECTING TO A LIVE GAS SUPPLY by practical and knowledge and understanding assessment.

ICAE1 (LS) 1st fix commercial appliances (Limited scope operative)

Changeover course designed to assist candidates who require re-assessment training or for new entrants to commercial heating who already hold their natural gas core ACS qualification.

ICPN 1st fix commercial pipework

This Gas Safety Assessment is designed to test the gas safety competence of an operative in first fixing of commercial installation pipework by practical and knowledge and understanding assessment.

TPCP1A Tightness testing and purging to IGE/UP/1A

Course designed for both new entrants and experienced practitioners, to enable candidates to understand the concepts of testing and purging large pipework installations, including risk assessments and calculations.

TCPC1 Tightness Testing and Purging to IGE/UP/1

Course designed for both new entrants and experienced practitioners, to enable candidates to understand the concepts of testing and purging large pipework installations, including risk assessments and calculations.

EFJLP1 Electro Fusion Jointing of Polyethylene Pipework

Introduction to common thermoplastics (MDPE, PVC, PP, PE, PVDF); key processing techniques; joint preparation; defects and how to avoid them; process control, inspection and testing, health and safety; practical electro-fusion welding in polypropylene or polyethylene pipework.

CIGA1 Commercial indirect fired heating appliances and equipment

Changeover course designed to assist candidates who require re-assessment training or for new entrants to commercial heating who already hold their natural gas core ACS qualification.

CDGA1 Commercial direct fired heating appliances

Changeover course designed to assist candidates who require re-assessment training or for new entrants to commercial heating who already hold their natural gas core ACS qualification.

CORT1 Commercial radiant plaque and radiant tube heaters

Changeover course designed to assist candidates who require re-assessment training or for new entrants to commercial heating who already hold their natural gas core ACS qualification.

BMP1 (was CBHP1) Boosters, Associated Controls and Pipework (to pressure not exceeding 0.5bar)

This Gas Safety Assessment is designed to test the gas safety competence of an operative in the work if assembly, commission, services, repair and breakdown of commercial gas booster/compressor installations, associated controls and high pressure pipework by practical and knowledge and understanding assessment.

CGFE1 Gas fuelled engines

This course is for experienced operatives who wish to undertake installation, commission, service, repair and breakdown of gas fuelled spark ignition and dual fuelled engines. 

COMCAT1 Commercial catering appliances, open / solid top range

Upgrade course designed to assist candidates who require re-assessment training or for new entrants to commercial catering who already hold their Natural Gas Core ACS qualification (CCN1 or an appropriate changeover).

COMCAT2 Commercial catering appliances, pressurised water boilers

Upgrade course designed to assist candidates who require re-assessment training or for new entrants to commercial catering who already hold their Natural Gas Core ACS qualification (CCN1 or an appropriate changeover).

COMCAT3 Commercial catering appliances, fryers, griddles, grill

Upgrade course designed to assist candidates who require re-assessment training or for new entrants to commercial catering who already hold their Natural Gas Core ACS qualification (CCN1 or an appropriate changeover).

COMCAT4 Commercial catering appliances, fish and chip ranges

Upgrade course designed to assist candidates who require re-assessment training or for new entrants to commercial catering who already hold their Natural Gas Core ACS qualification (CCN1 or an appropriate changeover).

COMCAT5 Commercial catering appliances, forced draught burners

Upgrade course designed to assist candidates who require re-assessment training or for new entrants to commercial catering who already hold their Natural Gas Core ACS qualification (CCN1 or an appropriate changeover).

CoDNCO1 Core changeover (CCN1 – COCN1)

This Gas Safety Assessment is designed to test the gas safety competence of an operative intending to extend the domestic natural gas work range to include the commercial natural gas work range by practical and knowledge and understanding assessment.

CoDC1 core changeover (CCN1 - CCCN1)

This Gas Safety Assessment is designed to test the gas safety competence of an operative intending to extend the work range from domestic natural gas appliances to include gas commercial catering appliances by practical and knowledge and understanding assessment.

CoCATA1 core changeover (CCN1 - COMCAT 1 & 3)

The course is for experienced operatives who wish to undertake commission, service, repair and breakdown of commercial catering appliances.

CoCCLNG1 core changeover (COCN1 - CCLNG1)

Upgrade course designed to assist candidates who require re-assessment training or for new entrants to commercial laundry who already hold their Commercial Natural Gas Core ACS qualification (CCCN1 or an appropriate changeover).

CCLP1 (PD) Core LPG safety for permanent dwellings

All aspects relating to core domestic LPG gas safety. The initial knowledge area for this course is related to permanent dwellings (house, flats etc), but additional areas such as leisure accommodation vehicles (caravans), residential park homes and boats can also be undertaken.

CCLP1 (RPH) Core LPG safety for residential park homes

All aspects relating to core domestic LPG gas safety. The initial knowledge area for this course is related to permanent dwellings (house, flats etc), but additional areas such as leisure accommodation vehicles (caravans), residential park homes and boats can also be undertaken.

CCLP1 (LAV) Core LPG safety for leisure accommodation vehicles

All aspects relating to core domestic LPG gas safety. The initial knowledge area for this course is related to permanent dwellings (house, flats etc), but additional areas such as leisure accommodation vehicles (caravans), residential park homes and boats can also be undertaken.

All courses above will have a certification fee of £55.00 + VAT, if courses are submitted together one certification fee applies per core + appliances.

Please advise us which courses are required, send any existing Gas Qualifications and we will quote accordingly on how many training days @ £125.00 + VAT per day are required.

Web design by Flaydemouse in Yeovil, Somerset